Skip to main content

Exarane/Exarane Forte

Device/Product name
Exarane/Exarane Forte
Active Ingredient
Enoxaparin sodium
Date of decision
Published
Submission type
New Entity
ATC codes
B01AB05
Decision
Approved
What was the decision based on
The decision was based on quality (chemistry and manufacturing), nonclinical (pharmacology and toxicology), and clinical (pharmacology, safety and efficacy) information submitted by the sponsor. The benefit-risk profile of Exarane/Exarane Forte was considered favourable for the therapeutic use approved.
What steps were involved in the decision process

Registration timeline

The following table summarises the key steps and dates for this application.

Description

Date

Submission dossier accepted and first round evaluation commenced

6 December 2021

Delegate’s Overall benefit-risk assessment and request for Advisory Committee advice

28 October 2022

Advisory Committee meeting

1 and 2 December 2022

Registration decision (Outcome)

27 June 2023

Completion of administrative activities and registration on ARTG

28 July 2023

Number of working days from submission dossier acceptance to registration decision*

228

*Statutory timeframe for standard applications is 255 working days

Date of entry onto ARTG
Black triangle scheme
No
Dose forms
Solution for injection
Strength
20 mg/0.2 mL, 40 mg/0.4 mL, 60 mg/0.6 mL, 80 mg/0.8 mL, 100 mg/1 mL, 120 mg/0.8 mL and 150 mg/1 mL
Other ingredients

Water for injections

Containers
Syringe
Pack sizes
10
Routes of administration
Subcutaneous and intravenous
Dosage

Prophylaxis of Venous Thrombosis

Prophylaxis against thromboembolism should be tailored according to the patient's risk. Risk factors include age over 40 years, history of deep vein thrombosis or pulmonary embolism, surgery and other trauma, prolonged immobilisation, cardiac disease, obesity, malignancy, varicose veins, hypercoagulable states, pregnancy and the puerperium, oral contraceptives, severe infection, inflammatory bowel disease.

a) High Risk Patients

In patients with high risk of thromboembolism, a Exarane dosage of 40 mg (0.4 mL; anti-Xa: 4000 IU) should be administered subcutaneously once daily. In high risk patients undergoing surgery, the initial dose should be given approximately 12 hours preoperatively. The timing of the first dose may need to be modified if spinal/epidural anaesthesia is to be performed.

b) Moderate Risk Patients

In patients with a moderate risk of thromboembolism, the recommended Exarane dosage is 20 mg (0.2 mL; anti‑Xa: 2000 IU) subcutaneously once daily. In moderate risk patients undergoing surgery, the initial dose should be given approximately 2 hours preoperatively. The timing of the first dose may need to be modified if spinal/epidural anaesthesia is to be performed.

Duration of Therapy

High to Moderate Risk: Prophylaxis should be continued for 7 to 10 days or until the risk of thromboembolism has diminished.

Prolonged Thromboprophylaxis

Therapy with 40 mg once daily for 30 post-operative days has been proven to be beneficial in total hip replacement surgery.

Under normal conditions of use, Exarane does not modify global clotting tests and therefore there is no need to perform these tests in order to monitor therapy.

Prophylaxis of Venous Thromboembolism in Medical Patients

The recommended dose should be 40 mg once daily by subcutaneous injection for a minimum of 6 days, continuing for a maximum of 14 days or less if the patient returns to full ambulation earlier than 14 days.

Treatment of Deep Venous Thrombosis

The initial clinical trials which established the efficacy of Exarane in the treatment of deep venous thrombosis were conducted on patients who were initially treated with heparin and then changed to Exarane when a definitive diagnosis was established. However, the use

of heparin prior to Exarane is not currently recommended. The average duration of therapy in the clinical trials was 10 days. No data are available on the safety of long term treatment. Data on use in patients over 65 years of age in these trials were limited.

The recommended dosage for treatment of established deep vein thrombosis with Exarane is 1.5 mg/kg body weight once daily (150 IU anti-Xa activity/kg bodyweight) or 1 mg/kg body weight (100 IU anti-Xa activity/kg bodyweight) twice daily subcutaneously. In high risk patients, for example, the obese or patients with baseline iliac vein thrombosis or cancer, a dose of 1 mg/kg body weight administered twice daily may be more beneficial.

Warfarin sodium therapy should be initiated when appropriate (usually within 72 hours of commencing Exarane initiation). Exarane should be continued for a minimum of 5 days and until a therapeutic oral anticoagulant effect has been achieved (International Normalization Ratio 2.0 to 3.0).

Treatment of Unstable Angina and Non-Q-Wave Myocardial Infarction

The recommended dose of Exarane is 1 mg/kg every 12 hours by subcutaneous injection, administered concurrently with oral aspirin. Treatment with Exarane in these patients should be prescribed for a minimum of 2 days and a maximum of 8 days.

Treatment of Acute ST-segment Elevation Myocardial Infarction (STEMI)

In patients with acute ST-segment elevation myocardial infarction, administered in conjunction with a fibrinolytic (fibrin-specific or non-fibrin specific), the recommended dose of Exarane is a single intravenous bolus of 30 mg plus a 1 mg/kg subcutaneous dose, followed by 1 mg/kg administered subcutaneously every 12 hours (maximum 100 mg for each of the first two subcutaneous doses only, followed by 1 mg/kg dosing for the remaining doses). For dosage in patients ≥75 years of age, see Section 4.2 of the PI - Dose and method of administration: Use in Renal Impairment and Use in the Elderly.

When administered in conjunction with a thrombolytic (fibrin-specific or non-fibrin specific), Exarane should be given between 15 minutes before and 30 minutes after the start of fibrinolytic therapy. All patients should receive aspirin as soon as they are identified as having

STEMI (100 to 300 mg once daily, unless contraindicated). The recommended duration of Exarane treatment is 8 days or until hospital discharge, whichever comes first.

For patients further managed with Percutaneous Coronary Intervention (PCI): If the last Exarane subcutaneous administration was given less than 8 hours before balloon inflation, no additional dosing is needed. If the last Exarane subcutaneous administration was given more than 8 hours before balloon inflation, an intravenous bolus of 0.3 mg/kg of Exarane should be administered.

Haemodialysis

In patients undergoing repeated sessions of haemodialysis, the prevention of thrombosis in the extracorporeal blood circuit is obtained by injection of a dose of 1 mg/kg (100 IU anti-Xa activity/kg) into the arterial line of the dialysis circuit at the start of the session. This dose is usually sufficient for a 4-hour haemodialysis session. If fibrin rings are formed, a fresh injection of 0.5 to 1 mg/kg (50 to 100 IU anti-Xa activity/kg) should be made depending on the time before the end of the dialysis.

In haemodialysed patients with a high risk of haemorrhage, (in particular, in pre or postoperative dialysed patients) or with a progressive haemorrhagic disorder, the dialysis sessions may be carried out by using a dose of 0.5 mg/kg (50 IU anti-Xa activity/kg) (double vascular access) or 0.75 mg/kg (75 IU anti-Xa activity/kg) (single vascular access).             

For further information refer to the Product Information.

Pregnancy category
C

Drugs which, owing to their pharmacological effects, have caused or may be suspected of causing, harmful effects on the human fetus or neonate without causing malformations. These effects may be reversible. Accompanying texts should be consulted for further details.

The use of any medicine during pregnancy requires careful consideration of both risks and benefits by the treating health professional. This must not be used as the sole basis of decision making in the use of medicines during pregnancy. The TGA does not provide advice on the use of medicines in pregnancy for specific cases. More information is available from obstetric drug information services in your State or Territory.
What was approved

Exarane/Exarane Forte (enoxaparin sodium) was approved for the following therapeutic use:

  • Prevention of thrombo-embolic disorders of venous origin in patients undergoing orthopaedic and general surgery.
  • Prophylaxis of venous thromboembolism in medical patients bedridden due to acute illness.
  • Prevention of thrombosis in extra-corporeal circulation during haemodialysis.
  • Treatment of established deep vein thrombosis.
  • Treatment of unstable angina and non-Q-wave myocardial infarction, administered concurrently with aspirin.
  • Treatment of acute ST-segment Elevation Myocardial Infarction (STEMI) as an adjunctive to thrombolytic treatment, including patients to be managed medically or with subsequent Percutaneous Coronary Intervention (PCI).
What is this medicine and how does it work
Exarane/Exarane Forte is a biosimilar of Clexane. In comparison with natural heparin enoxaparin sodium is characterised by a clear increase in the ratio between anti-factor Xa and anti-factor IIa activities which is always greater than 4.

It has several actions on the coagulation pathway through binding to anti-thrombin III. The anti-thrombotic activity is related to inhibition of thrombin generation and inhibition of two main coagulation factors: factor Xa and thrombin. Enoxaparin sodium also induces a sustained release of the tissue factor pathway inhibitor in vivo.
What post-market commitments will the sponsor undertake
  • Laboratory testing & compliance with Certified Product Details (CPD)
  1. All batches of Exarane and Exarane Forte supplied in Australia must comply with the product details and specifications approved during evaluation and detailed in the Certified Product Details (CPD).
  2. When requested by the TGA, the sponsor should be prepared to provide product samples, specified reference materials and documentary evidence to enable the TGA to conduct laboratory testing on the Product. Outcomes of laboratory testing are published biannually in the TGA Database of Laboratory Testing Results http://www.tga.gov.au/ws-labs-index and periodically in testing reports on the TGA website.
  • Certified Product Details
    • The Certified Product Details (CPD), as described in Guidance 7: Certified Product Details of the Australian Regulatory Guidelines for Prescription Medicines (ARGPM) [https://www.tga.gov.au/sites/default/files/pm-argpm-guidance-7.pdf], in PDF format, for the above products should be provided upon registration of these therapeutic goods. In addition, an updated CPD should be provided when changes to finished product specifications and test methods are approved in a Category 3 application or notified through a self-assessable change.
  • For all injectable products the Product Information must be included with the product as a package insert.

Further information

The latest Product Information (PI) and Consumer Medicines Information (CMI) can be found at the Australian Register of Therapeutic Goods (ARTG) search.

Australian Public Assessment Reports (AusPARs) can be found at the AusPAR search.

The latest news and updates regarding therapeutic goods regulation can be found at the TGA news.

Help us improve the Therapeutic Goods Administration site