Submitting Certified Product Details (CPD) for prescription medicines

The CPD is a summary of the formulation, quality control and shelf life for a prescription medicine.

It specifies the medicine’s:

• formulation
• manufacturing process, and test methods and 
• their specifications.

The CPD is prepared by sponsors at the request of the TGA to avoid searching through large dossiers and files when conducting testing, such as:

• batch release testing to confirm consistency of manufacture of biological medicines (this is a condition of registration which is imposed on particular medicines under s. 28 of the Therapeutic Goods Act 1989 (the Act))
• testing in response to adverse drug reactions (regulated under s. 29AA of the Act).

The TGA may request the CPD or an updated CPD:

• as a condition of registration
• as part of the process for requesting a variation to an entry in the Australian Register of Therapeutic Goods (ARTG) or
• at the TGA’s discretion.

The CPD contents

The CPD contains:

• a covering page (which contains information that will be used by the TGA for indexing purposes)
• details of packaging
• details of formulation
• release and expiry specifications
• details of the sterilisation method
• details of the shelf life and storage conditions
• detailed descriptions of testing methodologies as appendices.

What to include

Include the following information in the CPD:

• detailed standard operating procedures for crucial tests for the drug substance (e.g. potency, content or impurities) and for all drug product tests, with a bookmark or hyperlink in the index.
• sufficient detail of testing methodologies so that they can be replicated by the TGA, preferably in the form of the standard operating procedure from the company’s quality control laboratory.
• a list of any specialised instrumentation, such as unusual high-performance liquid chromatography (HPLC) columns or dissolution apparatus that are not specified in a default standard pharmacopoeia.
• details of the standards, controls and system suitability criteria for the test. The standards and controls should also be supplied to the TGA, if requested.
• details of how antimicrobial activity is neutralised in descriptions of sterility test methods.

Note

Each dosage form should have a separate CPD.

Different strengths and packaging may appear in the same CPD, but a separate set of specifications should be provided for each strength. Any differences should be made clear (e.g. different formulations or different tablet weights for different strengths).

A senior representative of the Australian product sponsor should sign the CPD to confirm that this sponsor takes responsibility for the accuracy of the contents.

Specific requirements for biological medicines

For many biological medicines, critical tests are conducted on the drug substance and not repeated on the drug product because of low concentrations of the drug substance or interference by excipients.

Because of this, the CPD for biological medicines should contain the covering page (Parts 1 and 2) that contains the formulation, strengths, ARTG numbers, sponsor details and tracking details, as well as the following information in Part 3:

• a flow chart of the drug substance manufacturing process
• the drug substance testing procedures and release specifications
• a flow chart of the drug product manufacturing process
• the drug product testing procedures, and release and expiry specifications
• the sterilisation method(s)
• the shelf life and storage conditions
• any current exemptions under s. 14 of the Act.

How to provide the CPD

Proformas for the CPD for biological prescription medicines and chemical prescription medicines are available on the TGA website or at request to the appropriate testing email inbox.

• Provide the CPD electronically as a single Portable Document Format (PDF) document
• Include a hyperlinked index to the methodology standard operating procedures.

When to provide the CPD

Submit the CPD upon request by the TGA, rather than in the initial application to register a medicine, because there can be changes to make following the evaluation phase.

For applications to register biological medicines

The TGA will usually request the CPD towards the end of the evaluation of the quality data (Module 3 of the Common Technical Document (CTD)).

For applications to register chemical entities

The TGA will usually request the CPD after approval of the product(s). 

Note

Ensure the CPD accurately reflect the quality data approved by the TGA.

Once the CPD has been requested, ensure it is provided in a timely manner for checking by TGA evaluators, so that an agreed version is available for any testing that may be necessary.

This is particularly important when batch release has been imposed as a condition of registration, as usually happens with biological medicines.

Other reasons for requesting a CPD

The TGA may also request the CPD if:

• a sample is to be tested
• the TGA does not already hold a copy
• the TGA’s copy of the CPD is more than five years old.

The TGA reserves the right to check or recheck the CPD at any stage at its discretion.

Any discrepancies may lead to questions to the sponsor under s. 31.

Any current s. 14 exemption should be detailed in the appropriate table of the CPD. Any batch-specific exemptions need not be included.

An updated CPD is normally sought following approval of a variation to change the test specifications, including deleting, changing or adding test methods or limits for results.